Intel Core i3-10100F vs AMD E-240 vs Intel Core i7-10700

Intel Core i3-10100F

The Intel Core i3-10100F is an entry level quad-core processor for desktop PCs based on the Comet Lake-S architecture. It offers four cores clocked at 3.6 - 4.3 GHz with HyperThreading / SMT support (8 threads). The CPU is still manufactured on 14nm++ and does not feature an integrated graphics card. Compared to the older Coffee Lake Core i3-9100F, the i3-10100F offers a 100 MHz higher Boost speed, HyperThreading and support for faster DDR4 memory (2666 MHz).

Performance

While we have not tested a single system powered by the 10100F as of August 2023, it's reasonable to expect the chip to be just slightly faster than the Core i5-10200H.

Intel specifies the CPU with a TDP of 65 Watt. For desktops that means that the processor won't need big cooling solutions and can be used in small cases.

AMD E-240

The AMD E-240 (codename Zacate) is a single core processor for small notebooks and netbooks. It offers a relatively powerful integrated graphics card and a single channel DDR3-1066 memory controller.

Inside the E-240 one Bobcat core (the second one is deactivated) can access 512KB level 2 cache. In comparison to the Atom processors, the Bobcat architecture uses an "out-of-order" execution and is therefore faster at the same clock speed. However, the performance is far worse than similar clocked Penryn (Celeron) or Danube (AMD V-Series) cores. On average the cpu performance of the E-240 should be between a 2 GHz Atom and a Celeron single core with 1.1 GHz.

The integrated Radeon HD 6310 graphics card offers 80 shaders and an UVD3 video processor. Compared to the slow GMA 3150 in the Atom processors, the HD6310 offers a lot more performance and is about as fast as the Nvidia ION graphics solution.

The power consumption is rated with a TDP of 18 Watt by AMD.

Intel Core i7-10700

The Intel Core i7-10700 is a high-end desktop CPU based on the Comet Lake architecture. The CPU offers 8 cores and 16 threads clocked at 2.9 - 4.8 GHz. All cores can run at up to 4.6 GHz.

Compared to the older Core i7-9700, the 10700 now enables HyperThreading and therefore in some applications a nice performance boost. The single core performance is quite similar.

The chip is manufactured on 14nm++ process at Intel. The TDP is rated at 65 Watt (PL1) but the PL2 is set to 224 Watt for short term boosts (up to 28 seconds).