Intel Core i3-10100 vs Intel Core i5-7300U vs Intel Xeon E3-1505M v6

Intel Core i3-10100

Intel Core i5-7300U

The Intel Core i5-7300U is a fast dual-core processor for notebooks based on the Kaby Lake architecture and was announced in January 2017. It integrates 2 CPU cores with Hyper-Threading support clocked at 2.6 - 3.5 GHz (2 core Turbo also 3.5 GHz). Besides two cores, the processor is also equipped with the HD Graphics 620 GPU as well as a dual-channel memory controller (DDR3L-1600/DDR4-2400). It is manufactured in a 14nm process with FinFET transistors.

Architecture

Intel basically uses the same micro architecture compared to Skylake, so the per-MHz performance does not differ. The manufacturer only reworked the Speed Shift technology for faster dynamic adjustments of voltages and clocks, and the improved 14nm process allows much higher frequencies combined with better efficiency than before.

Performance

With 2.5 to 3.5 GHz, the Core i5-7300U clocks significantly higher than the old Core i5-7200U (2.5 - 3.1) and Core i5-6200U (2.3 - 2.8 GHz). Thanks to the fast Turbo frequency, the performance should be slightly below to the Core i7-7500U (2.7 - 3.5 GHz, but 4 MB L3 cache). Therfore, the performance is sufficient for demanding tasks.

Graphics

The integrated Intel HD Graphics 620 has 24 Execution Units (similar to previous HD Graphics 520) running at 300 - 1100 MHz. The performance depends a lot on the memory configuration; it should be comparable to a dedicated Nvidia GeForce 920M in combination with fast DDR4-2133 dual-channel memory.

Contrary to Skylake, Kaby Lake now supports hardware decoding for H.265/HEVC Main 10 with a 10-bit color depth as well as Google's VP9 codec. The dual-core Kaby Lake processors, which were announced in January, should also support HDCP 2.2.

Power Consumption

The chip is manufactured in an improved 14nm process with FinFET transistors, which improves the efficiency even further. Intel still specifies the TDP with 15 Watts, but it can also be reduced to 7.5 Watts by the notebook manufacturers (cTDP down). This will obviously affect the performance, because the Turbo Boost cannot be maintained for longer periods.

Intel Xeon E3-1505M v6

The Intel Xeon E3-1505M v6 is a fast quad-core processor notebooks based on the Kaby Lake architecture and was announced in January 2017. It is the second fastest mobile Xeon model and the performance is slightly better tha the 100 MHz slower clocked consumer Core i7-7820HQ. Compared to the Core processors, the chip also supports ECC-RAM (error correction). Besides four cores including Hyper-Threading support running at 3 - 4 GHz (4 cores up to 3.6 GHz, 2 cores up to 3.8 GHz), the processor is also equipped with the professional HD Graphics P630 GPU as well as a dual-channel memory controller (DDR3L-1600/DDR4-2400). It is manufactured in a 14nm process with FinFET transistors.

Architecture

Intel basically uses the same micro architecture compared to Skylake, so the per-MHz performance does not differ. The manufacturer only reworked the Speed Shift technology for faster dynamic adjustments of voltages and clocks, and the improved 14nm process allows much higher frequencies combined with better efficiency than before.

Performance

Thanks to the higher clocks, even the smaller model of the mobile Xeons is ahead of the fastest Skylake models (Xeon E3-1575M v6) and is therefore als powerful enough for very demanding applications.

Graphics

The integrated professional Intel HD Graphics P630 has 24 Execution Units (similar to previous HD Graphics 530) running at 350 - 1100 MHz. The performance depends a lot on the memory configuration; it should be comparable to a dedicated Nvidia GeForce 920M in combination with fast DDR4-2133 dual-channel memory. It offers certified drivers for 15 professional and CAD applications.

Contrary to Skylake, Kaby Lake now supports hardware decoding for H.265/HEVC Main 10 with a 10-bit color depth as well as Google's VP9 codec. The dual-core Kaby Lake processors, which were announced in January, should also support HDCP 2.2.

Power Consumption

The chip is manufactured in an improved 14nm process with FinFET transistors, which improves the efficiency even further. Intel still specifies the TDP with 45 Watts, but it can also be reduced to 35 Watts by the notebook manufacturers (cTDP down). This will obviously affect the performance, because the Turbo Boost cannot be maintained for longer periods.