NVIDIA GeForce RTX 4050 Laptop GPU vs NVIDIA GeForce 920M

NVIDIA GeForce RTX 4050 Laptop GPU

The NVIDIA GeForce RTX 4050 Laptop GPU (codename GN21-X2) is a mid-range laptop GPU. It is based on the AD107 chip and uses the Ada Lovelace architecture. The RTX 4050 Laptop offers 2560 shaders and uses 6 GB GDDR6 dedicated graphics memory with a clock speed of 16 Gbps (effective) and a 96 Bit memory bus. The TGP (Total Graphics Power) can be configured between 35 and 115 Watt (+ 10-25 Watt Dynamic Boost from the CPU) leading to different performance levels. The boost clock depends on the TGP settings and ranges from 1605 MHz (35 Watt) to 2370 MHz (115 Watt). The performance therefore is also highly depending on the laptop and TDP settings.

In our benchmarks, the RTX 4050 stays slightly behind the older mobile RTX 3060 but is clearly faster than the mobile RTX 3050 Ti. Therefore, it is best suited for 1920x1080 gaming at high to ultra settings depending on the game (see benchmarks below).

The RTX 4050 offers 80 tensor cores and therefore supports DLSS 3 including frame generation that can have a big impact in supported games. The raytracing cores however will see less usage, as the RTX 4050 does not offer enough performance for high detail settings and raytracing in demanding games.

The AD107 chip is manufactured in 5nm at TSMC (4N process).

NVIDIA GeForce 920M

The NVIDIA GeForce 920M (sometimes also NVIDIA GeForce GT 920M) is an entry level DirectX 12 graphics card. It is based on the 28 nm Kepler architecture and uses the same GK208 chip as the GeForce GT 730M, 825M and 740M. The 384 shaders are clocked at 954 MHz, while the memory (64-bit DDR3 interface) runs at 900 MHz (1800 MHz effective).

Architecture

GK208 is based on the Kepler architecture and offers two shader blocks, called SMX, each with 192 shaders for a total of 384 shader cores. The shaders are clocked at the same speed as the rest of the chip. Furthermore, the GK208 chip has 16 TMUs and 8 ROPs on a 64-bit memory interface.

PCIe 3.0 is now supported by the mobile Kepler series and GPU Boost 2.0 mode can automatically overclock the card if the laptop cooling system allows it. This feature is available on any notebook with a graphics card from the 800M series.

Performance

The GeForce 920M offers a performance similar to the AMD Radeon R7 M260 or R7 M360 and will handle modern games (as of 2014/2015) in low settings only. For comparison, a GeForce 930M is about 20 to 30 percent faster than the 920M.

Features

The feature set of the 920M corresponds to the GT 730M and 825M. This includes support for up to 4 active displays. Furthermore, high resolution monitors of up to 3840x2160 pixels can now be connected using DisplayPort 1.2 or HDMI 1.4a if available. HD-Audio codecs, such as Dolby TrueHD and DTS-HD, can be transmitted via bitstream mode through the HDMI port. However, as most laptops will feature Optimus, the integrated GPU will likely have direct control over the display ports and may limit the feature set available by the Nvidia Kepler cards.

The 5th generation PureVideo HD video processor (VP5) offers hardware decoding of HD videos. Common codecs such as MPEG-1/2, MPEG-4 ASP, H.264 and VC1/WMV9 are fully supported up to 4K resolutions while VC1 and MPEG-4 are supported up to 1080p. Two streams can be decoded in parallel for features such as Picture-in-Picture. Another feature is the inclusion of a dedicated video encoding engine similar to Intel QuickSync that can be accessed via the NVENCI API.

Power Consumption

The power consumption of the GeForce 920M is similar to the 825M and suited for 13-inch laptops and above.