NVIDIA GeForce RTX 3050 vs Intel Arc A770 vs Intel Arc A770M

NVIDIA GeForce RTX 3050

The Nvidia GeForce RTX 3050 is a mid-range desktop graphics card. It is based on the GA106 Ampere chip and offers 8 GB GDDR6 graphics memory with a 128 Bit memory bus. It offers 2,560 cores and supports PCIe 4.0.

The performance is similar to the older GeForce RTX 2060 and therefore best suited for 1080p gaming of modern and demanding games in high settings.

The GA106 chip offers 3,840 FP32 ALUs of which half can also execute INT32 instructions (i.e. 1,920 INT32 ALUs). With Turing all shaders could still execute FP32 or INT32 instructions. The raytracing and tensor cores on the chip were also improved according to Nvidia. The Ampere chips also include an improved 5th generation video encoder (NVENC for H.264 and H.265) and a 7th generation decoder (for various formats now including AV1).

The GA106 chip is manufactured by Samsung in 8nm (8N), which is not quite able to keep up with the 7nm node at TSMC (e.g. used by AMD and also for the professional GA100 Ampere chip). The TDP of the RTX 3050 is specified at 130 Watt and therefore better than the previous RTX 2060 (160 Watt).

Intel Arc A770

The Intel Arc A770 is a mid-range desktop GPU and is manufactured using the 6 nm process at TSMC. The graphics processor has 4,096 shader units and 8 or 16 GB GDDR6 VRAM with a 256-bit interface (16 Gbps, 512 GB/s).

Features

As the top model based on the Alchemist architecture, Intel offers the Arc A770, the top model in the series. As a completely new development, Intel wants to put pressure on AMD and Nvidia with these graphics cards. Features such as ray tracing are supported and the Intel Arc A770 comes with 32 RT cores. Intel is also implementing 512 Tensor Cores, which we can already find in the current graphics cards from Nvidia. With support for AV1, the graphics card is particularly interesting for content creators. Only the Ada Lovelace models from Nvidia and the RDNA3 GPUs from AMD are currently capable of hardware-side encoding and decoding with the new codec.

Performance

The performance of the Intel Arc A770 is comparable with an Nvidia GeForce RTX 4060 or an AMD Radeon RX 7600 comparable. The Intel model copes much better with newer games. With ray tracing enabled, the Intel Arc A770 can even outperform its two competitors. Based on the performance shown, the Intel Arc A770 is ideally suited for 1080p gaming in 2023.

Power consumption

The manufacturer specifies the power consumption of the Intel Arc A770 at 225 watts (TGP). This is slightly more than a Nvidia GeForce RTX 4060 or the AMD Radeon RX 7600.

Intel Arc A770M

The Intel Arc A770M is a dedicated mobile lower- mid-range graphics card for laptops based on Xe HPG microarchitecture. It uses the ACM-G10 chip and offers all of the 32 Xe-cores (512 ALUs), 32 ray tracing units and a 256-bit memory bus for 12 GB GDDR6 graphics memory. The chip can clock from 300 MHz (low frequency mode) to 1650 MHz (high frequency) or in short bursts 2050 MHz (Turbo). The chip integrates 21.7 billion transistors, uses a BGA2660 package (soldered), and the die measures 406 mm2.

The performance of the Arc A770M is not yet known. The power consumption is similar to a RTX 3070 and therefore we see the performance slightly below a RTX 3070 mobile.

The chip also integrates two media engines for VP9, AVC, HEVC, and AV1 8k en- and decoding. The 4 display pipes support up to 4x 4k120 HDR via DMI 2.0B or DisplayPort 2.0 10G. 

The A770M is produced in 6nm at TSMC (N6 process) and supports dynamic power share (using Deep Link) with 12th gen Intel CPUs (Alder Lake).