Intel Iris Pro Graphics 5200 vs NVIDIA GeForce 920M

Intel Iris Pro Graphics 5200

The Intel Iris Pro Graphics 5200 (GT3 + eDRAM), also called the HD Graphics 5200, is a processor graphics card that is included in some of the Haswell processors of 2013 (e.g. Core i7-4750HQ). It represents the highest configuration of the integrated graphics unit (40 execution units) and also has an additional eDRAM cache (128 MB on-package, 77 mm², 102 GB/s). The base clock can be automatically overclocked using Turbo Boost technology. Depending on the processor model, the base and turbo clock rates may differ (usually up to 1200 - 1300 MHz), resulting in varying graphics performance between CPU models.

In comparison to the HD 4000, the graphics core has been modified extensively. The Iris Pro supports DirectX 11.1, OpenCL 1.2 and OpenGL 4.0. It also features an improved decoder for 4K videos and the fast Quick Sync encoder.

Thanks to the fast eDRAM memory, the average performance of the Iris Pro is only about 15 percent behind the dedicated mid-range cards GeForce GT 650M and GT 750M (DDR3 versions). This makes the Iris Pro even faster than AMDs Radeon HD 8650G and the fastest integrated GPU of 2013. Therefore, many current games can be played fluently in medium or high detail settings and a resolution of 1366 x 768 pixels. In some older or less demanding titels like Diablo III or Fifa 2013, even higher resolutions or quality settings may be possible.

Due to the 22nm 3D Tri-Gate production process, power consumption should be relatively low. The Iris Pro can be found on certain quad-core Haswell CPUs in the 47 Watt TDP range.

NVIDIA GeForce 920M

The NVIDIA GeForce 920M (sometimes also NVIDIA GeForce GT 920M) is an entry level DirectX 12 graphics card. It is based on the 28 nm Kepler architecture and uses the same GK208 chip as the GeForce GT 730M, 825M and 740M. The 384 shaders are clocked at 954 MHz, while the memory (64-bit DDR3 interface) runs at 900 MHz (1800 MHz effective).

Architecture

GK208 is based on the Kepler architecture and offers two shader blocks, called SMX, each with 192 shaders for a total of 384 shader cores. The shaders are clocked at the same speed as the rest of the chip. Furthermore, the GK208 chip has 16 TMUs and 8 ROPs on a 64-bit memory interface.

PCIe 3.0 is now supported by the mobile Kepler series and GPU Boost 2.0 mode can automatically overclock the card if the laptop cooling system allows it. This feature is available on any notebook with a graphics card from the 800M series.

Performance

The GeForce 920M offers a performance similar to the AMD Radeon R7 M260 or R7 M360 and will handle modern games (as of 2014/2015) in low settings only. For comparison, a GeForce 930M is about 20 to 30 percent faster than the 920M.

Features

The feature set of the 920M corresponds to the GT 730M and 825M. This includes support for up to 4 active displays. Furthermore, high resolution monitors of up to 3840x2160 pixels can now be connected using DisplayPort 1.2 or HDMI 1.4a if available. HD-Audio codecs, such as Dolby TrueHD and DTS-HD, can be transmitted via bitstream mode through the HDMI port. However, as most laptops will feature Optimus, the integrated GPU will likely have direct control over the display ports and may limit the feature set available by the Nvidia Kepler cards.

The 5th generation PureVideo HD video processor (VP5) offers hardware decoding of HD videos. Common codecs such as MPEG-1/2, MPEG-4 ASP, H.264 and VC1/WMV9 are fully supported up to 4K resolutions while VC1 and MPEG-4 are supported up to 1080p. Two streams can be decoded in parallel for features such as Picture-in-Picture. Another feature is the inclusion of a dedicated video encoding engine similar to Intel QuickSync that can be accessed via the NVENCI API.

Power Consumption

The power consumption of the GeForce 920M is similar to the 825M and suited for 13-inch laptops and above.