Intel HD Graphics P530 vs NVIDIA GeForce RTX 3080 Ti vs Intel HD Graphics 4400

Intel HD Graphics P530

The Intel HD Graphics P530 (GT2) is an integrated graphics unit, which can be found in various Xeon workstation processors of the Skylake generation. The "GT2" version of the Skylake GPU offers 24 Execution Units (EUs) clocked at up to 1050 MHz (depending on the CPU model). Due to its lack of dedicated graphics memory or eDRAM cache, the P530 has to access the main memory (2x 64bit DDR3L-1600 / DDR4-2133).

Performance

Depending on the memory configuration, the HD Graphics P530 is just slightly behind a dedicated GeForce 920M and will handle modern games (as of 2015) in low or medium settings.

Features

The revised video engine now decodes H.265/HEVC completely in hardware and thereby much more efficiently than before. Displays can be connected via DP 1.2 / eDP 1.3 (max. 3840 x 2160 @ 60 Hz), whereas HDMI is limited to the older version 1.4a (max. 3840 x 2160 @ 30 Hz). However, HDMI 2.0 can be added using a DisplayPort converter. Up to three displays can be controlled simultaneously.

Power Consumption

The HD Graphics P530 can be found in mobile quad-core Xeon processors with 45 W TDP.

NVIDIA GeForce RTX 3080 Ti

The Nvidia GeForce RTX 3080 Ti is high-end desktop graphics card based on the Ampere generation. It uses the big GA102 chip and offers 10,210 shaders and 12 GB GDDR6X graphics memory. The main difference to the expensive RTX 3090 is the reduced VRAM (12 vs. 24 GB and a slight reduction in the shader count (-256 shaders).

Therefore, the gaming performance is quite similar to the RTX 3090 and best suited for 4K gaming with maximum detail settings.

As the RTX 3090, the RTX 3080 Ti is specified with a 350 Watt TDP and therefore quite power hungry (750 Watt power supply recommended).

Intel HD Graphics 4400

The Intel HD Graphics 4400 (GT2) is a processor graphics card included in some of the ULV Haswell processors of 2013. The relatively low base clock can be automatically overclocked using Turbo Boost technology. Depending on the processor model, the turbo clock rates may differ, resulting in varying graphics performance between models.

In comparison to the HD 4000, the HD 4400 graphics core has been modified extensively. The GPU now supports DirectX 11.1, OpenCL 1.2 and OpenGL 4.0. It also features an improved decoder for 4K videos and the fast Quick Sync encoder. Compared to the faster 4600, the 4400 offers the same amount of shaders, but lower clock speeds (see table of clock speeds of the different CPU models below).

The performance of the HD Graphics 4400 is somewhat below the HD 4600, since the GPU is designed for ULV models. Therefore, the clock rates are relatively low. Furthermore, the reduced TDP limits the Turbo Boost. Compared to the ULV versions of the Ivy Bridge HD 4000, the HD 4400 is about 20 - 30 percent faster. This performance boost is achieved by architectural improvements and an increased number of execution units: The GT2 version integrates 20 EUs, compared to 16 EUs for the old HD 4000. Depending on the clock rate, the HD 4400 matches the performance of a dedicated Radeon HD 7550M.

Due to the 22nm 3D Tri-Gate production process, the power consumption is relatively low. The HD Graphics 4400 can be found on ULV dual-core Haswell models with a TDP of 15 watts.