Intel HD Graphics (Cherry Trail) vs NVIDIA GeForce GTX 1060 (Desktop) vs Intel HD Graphics 4400

Intel HD Graphics (Cherry Trail)

The Intel HD Graphics (Cherry Trail) is an integrated graphics card in the Cherry-Trail SoCs (e.g. Atom x7-Z8700). Based on a Broadwell GPU (Intel Gen8) and supports DirectX 11.2. Depending on the SoC offers 12 or 16 EUs.

Atom x7-Z8700: 16 EUs @ 200 - 600 MHz, dual-channel memory
Atom x5-Z8500: 12 EUs @ 200 - 600 MHz, dual-channel memory
Atom x5-Z8300: 12 EUs @ 200 - 500 MHz, single-channel memory

In Windows, gaming is limited to less demanding or quite old games. Using Android, even high end 3D games should run fluently. For example Team Fortress 2 was running on the Surface 3 (x7-Z8700) only in lowest settings and 1280x720 fluently (11 - 69 fps range).

The integrated video decoder is able to display even 4K videos (H.264 tested) fluently.

The Intel HD Graphics GPU in our review sample of the MS Surface 3 (Atom x7-Z8700) only supported DisplayPort 1.1 as it seems, as 4K (3840x2160) with 30 Hz was the maximum Refresh Rate we could achieve (no 60 Hz selectable with the pre-installed drivers).

NVIDIA GeForce GTX 1060 (Desktop)

The Nvidia GeForce GTX 1060 is a graphics card for desktops and high end laptops (upcoming, see our article for the mobile GTX 1060 for benchmarks and specs). It is based on the Pascal architecture and manufactured in 16 nm FinFET at TSMC. The GPU is be based on the smaller GP106 chip. In laptops it has the codename N17E-G1 and will be the successor to the old GTX 970M (predecessor). The laptop version should be launched in August 2016. The desktop version is already out.

The performance of the 6 GB version is on par with an older GeForce GTX 980 (desktop and laptop). Therefore, 1080p gaming at highest detail is currently the best use case for the card. A comprehensive review of the desktop GeForce GTX 1060 Founders Edition with 6 GB GDDR5 can be found here. Beware, the upcoming 3 GB desktop variant should feature 128 shader less but clocked slightly higher. Still the performance should be definately slower than the 6 GB version.

Intel HD Graphics 4400

The Intel HD Graphics 4400 (GT2) is a processor graphics card included in some of the ULV Haswell processors of 2013. The relatively low base clock can be automatically overclocked using Turbo Boost technology. Depending on the processor model, the turbo clock rates may differ, resulting in varying graphics performance between models.

In comparison to the HD 4000, the HD 4400 graphics core has been modified extensively. The GPU now supports DirectX 11.1, OpenCL 1.2 and OpenGL 4.0. It also features an improved decoder for 4K videos and the fast Quick Sync encoder. Compared to the faster 4600, the 4400 offers the same amount of shaders, but lower clock speeds (see table of clock speeds of the different CPU models below).

The performance of the HD Graphics 4400 is somewhat below the HD 4600, since the GPU is designed for ULV models. Therefore, the clock rates are relatively low. Furthermore, the reduced TDP limits the Turbo Boost. Compared to the ULV versions of the Ivy Bridge HD 4000, the HD 4400 is about 20 - 30 percent faster. This performance boost is achieved by architectural improvements and an increased number of execution units: The GT2 version integrates 20 EUs, compared to 16 EUs for the old HD 4000. Depending on the clock rate, the HD 4400 matches the performance of a dedicated Radeon HD 7550M.

Due to the 22nm 3D Tri-Gate production process, the power consumption is relatively low. The HD Graphics 4400 can be found on ULV dual-core Haswell models with a TDP of 15 watts.