Intel HD Graphics (Cherry Trail) vs NVIDIA GeForce GTX 1050 Ti (Desktop) vs Intel HD Graphics (Sandy Bridge)

Intel HD Graphics (Cherry Trail)

The Intel HD Graphics (Cherry Trail) is an integrated graphics card in the Cherry-Trail SoCs (e.g. Atom x7-Z8700). Based on a Broadwell GPU (Intel Gen8) and supports DirectX 11.2. Depending on the SoC offers 12 or 16 EUs.

Atom x7-Z8700: 16 EUs @ 200 - 600 MHz, dual-channel memory
Atom x5-Z8500: 12 EUs @ 200 - 600 MHz, dual-channel memory
Atom x5-Z8300: 12 EUs @ 200 - 500 MHz, single-channel memory

In Windows, gaming is limited to less demanding or quite old games. Using Android, even high end 3D games should run fluently. For example Team Fortress 2 was running on the Surface 3 (x7-Z8700) only in lowest settings and 1280x720 fluently (11 - 69 fps range).

The integrated video decoder is able to display even 4K videos (H.264 tested) fluently.

The Intel HD Graphics GPU in our review sample of the MS Surface 3 (Atom x7-Z8700) only supported DisplayPort 1.1 as it seems, as 4K (3840x2160) with 30 Hz was the maximum Refresh Rate we could achieve (no 60 Hz selectable with the pre-installed drivers).

NVIDIA GeForce GTX 1050 Ti (Desktop)

The Nvidia GeForce GTX 1050 Ti (N17P-G1) for desktops is an entry level gaming graphics card that was announced late 2016. It is based on the GP107 chip using the Pascal architecture and manufactured in 14nm FinFET at Samsung (the bigger Pascal chips are manufactured in 16nm at TSMC). Usually it is equipped with 4 GB GDDR5 memory with a 7 Gbps data rate. The mobile GTX 1050 Ti version should be announced later (beginning of 2017) and feature similar specs.

The performance of the GTX 1050 lies between the Radeon RX 460 and the RX 470 on a similar level of the old GeForce GTX 960 (or 970M). Therefore, the card is most suited for 1080p gaming at high detail settings (but not maximum settings).

See our extensive review of the MSI GeForce GTX 1050 Ti for more information on power consumption, benchmarks and noise level.

Intel HD Graphics (Sandy Bridge)

The Intel HD Graphics (Family) is a processor graphics card which is integrated in the cheap Celeron and Pentium model of the Sandy Bridge generation. It is similar to the Intel HD Graphics 2000 and not with the processor graphics of the older Arrandale dual-core processors (which bears the same name). 

Depending on the processor, the HD graphics offers a different base and Turbo Boost clock speed. Currently there are three different models:

• Power Saving e.g. Celeron 847: base 350MHz, Turbo 800MHz
• Celeron e.g. Celeron B810: base 650MHz, Turbo 950MHz
• Pentium e.g. Pentium B950: base 650MHz, Turbo 1100MHz

Furthermore, the slow CPU performance of some models may influence the games a lot. For example, although the GPU in the Celeron B710 differs not much from the Pentium B950, the gaming performance was clearly worse and many games were unplayable.

As the Intel HD Graphics 3000 and 2000, the processor graphics card is able to use part of the last level cache of the processor (2MB usually for the entry level CPUs). This could be seen as a small amount of very fast dedicated memory.

Altought 2x Antialiasing (AA) is supported, the chip is as fast as when rendering 4x AA. In the Unigine Valley benchmark a similar HD 3000 i7-2637M for example reached the same score with 2x AA and 4x AA.

The feature set compared to the HD Graphics 3000 is also reduced in these entry level CPUs. E.g. Intel Quick Sync (for de- and encoding of HD videos), In Tru 3D, Clear Video HD are usually deactivated.