Intel Xeon E-2276M vs Intel Core i3-10110Y vs Intel Core i7-8500Y

Intel Xeon E-2276M

The Intel Xeon E-2276M is a high-end processor for professional laptops with six cores based on the Coffee Lake architecture. The processor clocks at between 2.8 - 4.7 GHz and can execute up to twelve threads simultaneously thanks to Hyper-Threading / SMT. According to Intel, the CPU is manufactured in an improved 14nm (14nm++) process. Compared to the similar consumer Core i7-9850H, the mobile Xeon offers support for ECC main memory and clocks 100-200 MHz higher.

The Coffee Lake architecture is similar to Kaby Lake and differs only in the amount of cores (now six cores for the high end versions) and the improved 14nm process (14nm++ according to Intel).

Performance

The Xeon E-2276M is a high end processor in 2019 and therefore well suited for all tasks. Thanks to the high Turbo Boost, the single core performance is also very good. Long term performance however is very depending on good cooling and proper TDP settings and differs therefore for each laptop.

Graphics

The integrated Intel UHD Graphics P630 iGPU is the same as the old Intel HD Graphics P630 and the only difference to the UHD Graphics 630 in the consumer models are the professional drivers.

Power Consumption

Intel specifies the TDP with 45 watts and therefore the Xeon is only suited for big laptops with good cooling solutions.

Intel Core i3-10110Y

The Intel Core i3-10110Y is an extremely power efficient dual-core SoC for small laptops and tablets that was announced in August 2019. The faster models, like the Core i5-10310Y offer two additional cores however.

Performance

While we have not tested a single system built around the 10110Y as of August 2023, we have tested at least one laptop utilizing the 10100Y, an insignificantly slower chip (Amber Lake, 2 cores, 4 threads, up to 3.9 GHz.) Based on that, expect the 10110Y to be noticeably faster than the AMD 3050e. Performance of this kind is totally sufficient for basic day-to-day activities, as of late 2022.

Your mileage may vary depending on how high the CPU power limits are.

The integrated graphics adapter however is still the same as in the previous generations. It should be still called Intel UHD Graphics 615 and runs at 300 - 1000 MHz in the i3. Furthermore, the SoC integrates a VP9 and H.265 de- and encoder.

The TDP is specified at 7 Watts but can be varied from 5.5 to 9 Watt from the manufacturer (cTDP up/down) resulting in different performance (especially Turbo durations). Interestingly, the faster Core i5-10210Y with two more cores can be configured to lower 4.5 Watt.

Intel Core i7-8500Y

The Intel Core i7-8500Y is a very efficient dual-core SoC for tablets and passively cooled notebooks based on the Amber Lake generation and will be announced around August 2018. It is the fastest Amber Lake-Y CPU at the time of announcement and consists of two processor cores clocked at 1.5 - 4.2 GHz. Thanks to Hyper Threading, the processor can execute up to four threads simultaneously. The chips also includes the Intel HD Graphics 615 GPU, a dual-channel memory controller (DDR3L/LPDDR3) as well as VP9 and H.265 video de- and encoder. Compared to the Kaby Lake-Y predecessors (e.g. Core i7-7Y75), Amber Lake uses the same architecture produced in the improved 14nm+ FinFET process (no 14nm++) but offers higher clock speeds at an increased TDP rating.

Architecture

Intel basically used the familiar micro architecture from the Skylake / Kaby Lake generation, so the per-MHz performance is identical.

Performance

The performance of the Y series is highly depending on the cooling solution of the laptop / tablet and the TDP settings for sustained load. Therefore, the differences between a Core m3 and a i7 may be rather slim, if the thermals are very limited. The high Turbo clock speeds in Amber Lake should however lead to a very good single thread performance for short bursts.

Graphics

The integrated Intel HD Graphics 615 GPU has 24 Execution Units (EUs) like the old HD Graphics 515 and runs with clocks between 300 and 950 MHz in combination with this processor. The performance heavily depends on the TDP limit as well as the memory configuration; with fast LPDDR3-1866 RAM in dual-channel mode, the GPU should sometimes be able to compete with the HD Graphics 520, but can also be much slower in other scenarios. Modern games from 2016 will, if at all, only run smoothly in the lowest settings.

Contrary to Skylake, Kaby Lake and Amber Lake now also supports hardware decoding for H.265/HEVC Main10 with a 10-bit color depth as well as Google's VP9 codec.

Power Consumption

The chip is manufactured in the second generation 14 nm+ process with FinFET transistors. The typical TDP for the Amber Lake Y-series is specified at 5 Watts (previous generations were 4.5 Watt), and can be adjusted in both directions depending on the usage scenario.