Intel Arc A580 vs NVIDIA GeForce RTX 3050 Ti Laptop GPU vs NVIDIA GeForce RTX 3080 Ti

The Intel Arc A580 is an affordable mid-range desktop GPU and is manufactured using the 6 nm process at TSMC. The Intel Arc A580 is also equipped with the DG2-512 graphics chip for the graphics processor, although this only has 3,072 shader units. The VRAM is based on 8 GB GDDR6 with a 256-bit interface (16 Gbps, 512 GB/s). This makes the Intel Arc A580 the third fastest graphics card model from Intel.

Features

Based on the Alchemist architecture, the Intel Arc A580 can rely on the same features as an Intel Arc A750 or an Intel Arc A770. Intel is extremely well positioned in the price range up to 200 euros with the Arc A580. AMD and Nvidia hardly have any suitable models in their portfolios in this price range. Features such as ray tracing are also supported and upscaling technologies such as XeSS can compete with DLSS and FSR. The latter can also be used on Intel graphics cards due to the open standard. With support for AV1, the graphics card is also interesting for content creators. Only the significantly more expensive Ada Lovelace models from Nvidia and the RDNA3 GPUs from AMD are currently capable of hardware-side encoding and decoding with the new codec.

Performance

The performance of the Intel Arc A580 is comparable to an AMD Radeon RX 6600 XT. The Intel Arc A580 can also keep up relatively well with an Intel Arc A750 in the internal duel. Newer games are somewhat more suited to the Intel Arc graphics cards. Nevertheless, many games can now be played well on Intel graphics cards and can be adapted well thanks to the constant driver improvements.

Power consumption

The power consumption of the Intel Arc A580 is estimated by the manufacturer at 175 watts (TGP). In terms of efficiency, however, the Intel Arc A580 is not convincing. Intel is at a disadvantage here compared to AMD and Nvidia. Whether this will change with the successor aka "Battlemage" remains to be seen.

The Nvidia GeForce RTX 3050 Ti Laptop GPU (for laptops, NVIDIA_DEV.2583, GN20-P1) is a faster variant of the RTX 3050 mobile card and based on the GA107 Ampere chip. The chip offers 2560 CUDA, 20 Ray Tracing and 80 Tensor cores. The clock rate depends on the used TGP-version (from 35 - 80 Watt).

The performance (of the high TGP variants) should be similar to the old RTX 2060 and therefore most suited for 1080p gaming with high detail settings. The performance is not sufficient to enable Raytracing in most games, but the Tensor cores can be used for DLSS in some games (and get a performance boost with a slight quality reduction). Beware, that the low TGP variants will offer a significantly lower performance.

The GA107 chip offers 3,072 FP32 ALUs of which half can also execute INT32 instructions (i.e. 1,536 INT32 ALUs). The RTX 3050 Ti however maybe won't use all ALUs on the chip. With Turing all shaders could still execute FP32 or INT32 instructions. The raytracing and tensor cores on the chip were also improved according to Nvidia. The Ampere chips also include an improved 5th generation video encoder (NVENC for H.264 and H.265) and a 7th generation decoder (for various formats now including AV1).

The GA107 chip is manufactured by Samsung in 8nm (8N), which is not quite able to keep up with the 7nm node at TSMC (e.g. used by AMD and also for the professional GA100 Ampere chip).