Intel Core i5-6500T vs AMD Ryzen 3 2200G

Intel Core i5-6500T

The Intel Core i5-6500T is a frugal quad-core desktop processor based on the Skylake architecture, which was announced in August 2015. The CPU, which is manufactured in a 14 nm process, runs at 2.5-3.1 GHz and does not support Hyperthreading (only 4 threads simultaneously).

Architecture

Intel uses Skylake to replace both Broadwell as well as Haswell and therefore uses one core design for all TDP classes between 4.5-45 Watts. Several improvements of the Skylake architecture include bigger Out-to-Order-Buffer, optimizations for pre-fetching as well as bigger gains by Hyperthreading. However, the changes are small for a "Tock" – a new micro architecture – in general, so the per-MHz performance is only between 5-10 % (compared to Haswell) or less than 5 % higher (compared to Broadwell), respectively.

Performance

The performance is a bit better compared to the old Sandy Bridge Core i5-2400 (3.1-3.4 GHz, no Hyperthreading either).

Graphics

Graphics are handled by the integrated Intel HD Graphics 530 with 24 EUs (Execution Units), which is clocked at 350 - 1100 MHz. Compared to the HD Graphics 4600 (Haswell, 20 EUs), the performance is increased by around 25 percent. The overall GPU performance is still low-end, so modern games can, if at all, only be played smoothly with low settings.

Power Consumption

Intel specifies the TDP with 35 Watts, so it can also be used in notebooks (although bigger ones).

AMD Ryzen 3 2200G

The AMD Ryzen 3 2200G is a desktop APU that was announced in early 2018. It combines four Zen cores (4 threads as no SMT/HyperThreading support) clocked at 3.5 - 3.7 GHz with a Radeon RX Vega 8 graphics card with 8 CUs (512 of the 704 Shaders on the chip) clocked at up to 1100 MHz. The integrated dual-channel memory controller supports up to DDR-2933. The TDP is specified at 65 Watt and the CPU, GPU and memory are unlocked for overclocking. More information on Raven Ridge can be found in our launch article.