Intel Core i7-4510U vs Intel Core i7-7700HQ vs Intel Core m3-7Y32

Intel Core i7-4510U

Intel Core i7-7700HQ

The Intel Core i7-7700HQ is a fast quad-core processor for notebooks based on the Kaby Lake H architecture (7th generation Core), which was announced in January 2017 at CES. It is the successor to the Core i7-6700HQ from the Skylake generation and is manufactured in an improved 14 nm+ process, so the clocks are 200 MHz higher at the same TDP. The architecture was not changed, only the video engine got an update (see our Kaby Lake article).

The integrated graphics card is called Intel HD Graphics 630, but the architecture does not differ from the 530 GPU from the Skylake generation and only the clocks are slightly higher. 

Performance

Thanks to the 200 MHz higher clocks (5.5-7.6% depending on the Boost), the CPU performance is increased and roughly on par with the Core i7-6970HQ (2.8-3.7 GHz but with 128 MB eDRAM). The TDP can also be reduced to 35 Watts (cTDP down), but this will reduce the performance.

Power Consumption

Due to its 45-Watt TDP, the CPU will be used in bigger notebooks with at least 15 inches most of the time.

Intel Core m3-7Y32

The Intel Core m3-7Y32 is a very efficient dual-core SoC for tablets and passively cooled notebooks based on the Kaby Lake architecture and was announced early 2017. It is the more or less the successor to the in 2016 introduced Core m3-7Y30 that offers 400 MHz less Turbo Boost clock speed. Thanks to Hyper Threading, the processor can execute up to four threads simultaneously. The chips also includes the Intel HD Graphics 615 GPU, a dual-channel memory controller (DDR3L/LPDDR3) as well as VP9 and H.265 video de- and encoder. It is still produced in a 14 nm process with FinFET transistors. 

Architecture

Intel basically used the familiar micro architecture from the Skylake generation, so the per-MHz performance is identical. Only the Speed-Shift technology for faster dynamic adjustments of the voltages and clocks was improved, and the matured 14 nm process now also enables much higher frequencies and better efficiency than before. 

Performance

Since Intel basically removed the Core m5 and Core m7 series or included them into the higher i5 and i7 series, respectively, the m3-7Y32 is officially the last Core-m chip (together with the former m3-7Y30). Thanks to its high Turbo clock, the 7Y32 can sometimes keep up with the 15 Watt models for short peak load and single-thread scenarios, but the clocks will drop significantly under sustained workloads. The CPU is still suitable for many more demanding applications as well as multitasking. Thanks to the improved efficiency, the CPU can often even beat the Core m5 and m7 siblings from the previous Skylake generation.

Graphics

The integrated Intel HD Graphics 615 GPU has 24 Execution Units (EUs) like the old HD Graphics 515 and runs with clocks between 300 and 900 MHz in combination with this processor. The performance heavily depends on the TDP limit as well as the memory configuration; with fast LPDDR3-1866 RAM in dual-channel mode, the GPU should sometimes be able to compete with the HD Graphics 520, but can also be much slower in other scenarios. Modern games from 2016 will, if at all, only run smoothly in the lowest settings.

Contrary to Skylake, Kaby Lake now also supports hardware decoding for H.265/HEVC Main10 with a 10-bit color depth as well as Google's VP9 codec.

Power Consumption

The chip is manufactured in an improved 14 nm process with FinFET transistors, so the power efficiency was once again improved significantly. The typical TDP for the Y-series is specified at 4.5 Watts, and can be adjusted in both directions depending on the usage scenario.