Intel Core i7-4510U vs Intel Xeon E3-1505M v6 vs Intel Core i7-4930MX

Intel Core i7-4510U

Intel Xeon E3-1505M v6

The Intel Xeon E3-1505M v6 is a fast quad-core processor notebooks based on the Kaby Lake architecture and was announced in January 2017. It is the second fastest mobile Xeon model and the performance is slightly better tha the 100 MHz slower clocked consumer Core i7-7820HQ. Compared to the Core processors, the chip also supports ECC-RAM (error correction). Besides four cores including Hyper-Threading support running at 3 - 4 GHz (4 cores up to 3.6 GHz, 2 cores up to 3.8 GHz), the processor is also equipped with the professional HD Graphics P630 GPU as well as a dual-channel memory controller (DDR3L-1600/DDR4-2400). It is manufactured in a 14nm process with FinFET transistors.

Architecture

Intel basically uses the same micro architecture compared to Skylake, so the per-MHz performance does not differ. The manufacturer only reworked the Speed Shift technology for faster dynamic adjustments of voltages and clocks, and the improved 14nm process allows much higher frequencies combined with better efficiency than before.

Performance

Thanks to the higher clocks, even the smaller model of the mobile Xeons is ahead of the fastest Skylake models (Xeon E3-1575M v6) and is therefore als powerful enough for very demanding applications.

Graphics

The integrated professional Intel HD Graphics P630 has 24 Execution Units (similar to previous HD Graphics 530) running at 350 - 1100 MHz. The performance depends a lot on the memory configuration; it should be comparable to a dedicated Nvidia GeForce 920M in combination with fast DDR4-2133 dual-channel memory. It offers certified drivers for 15 professional and CAD applications.

Contrary to Skylake, Kaby Lake now supports hardware decoding for H.265/HEVC Main 10 with a 10-bit color depth as well as Google's VP9 codec. The dual-core Kaby Lake processors, which were announced in January, should also support HDCP 2.2.

Power Consumption

The chip is manufactured in an improved 14nm process with FinFET transistors, which improves the efficiency even further. Intel still specifies the TDP with 45 Watts, but it can also be reduced to 35 Watts by the notebook manufacturers (cTDP down). This will obviously affect the performance, because the Turbo Boost cannot be maintained for longer periods.

Intel Core i7-4930MX

The Intel Core i7-4930MX is a high-end quad-core processor for laptops and successor of the i7-3940XM. It is based on the Haswell architecture and was launched in Q2/2013. Due to Hyperthreading, the four cores can handle up to eight threads in parallel leading to better utilization of the CPU. Each core offers a base speed of 3.0 GHz but can dynamically increase clock rates with Turbo Boost up to 3.7 GHz (for 4 active cores), 3.8 GHz (for 2 active cores) and 3.9 GHz (for 1 active core). Furthermore, the Extreme CPUs offer an unlocked multiplicator for easy overclocking.

Haswell is the successor to the Ivy Bridge architecture with improvements on both GPU and CPU performance. The CPUs are produced in 22nm and offer an optimized branch prediction as well as additional execution ports. Furthermore, new features like AVX2 and FMA should increase the performance in future applications.

Due to these changes, the performance per clock has been improved by about 10 percent compared to Ivy Bridge. Therefore, the 4930MX is almost 10 % faster than the former i7-3940XM.

The integrated Intel HD Graphics 4600 offers 20 Execution Units (EUs) clocked at 400 MHz up to 1350 MHz with Turbo Boost, making it about 30 % faster than the HD 4000.

The i7-4930MX is rated at a TDP of 57 W including graphics card, memory controller and VRMs.  Therefore, the CPU is only suited for laptops 17-inches or greater.